From 1 - 10 / 41
  • During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • During austral summer 1990/91, the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys off Wilkes Land, and around the Balleny Islands. During this cruise 1935 km of 30-fold multichannel seismic reflection (MCS) data were collected between longitude 150 and 169 degrees East, and latitude 56 and 64 degrees South. The surveys were carried out by the research vessel OGS Explora. The 14 second, 4 ms sample rate, digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 74.8 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation.

  • During austral summer 1988/89, the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys off Wilkes Land, and around the Balleny Islands. During this cruise 3045 km of 30-fold multichannel seismic reflection (MCS) data were collected between longitude 152 and 169 degrees East, and latitude 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The 12 second, 4 ms sample rate, digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 45.16 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Resample to 8 ms, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation.

  • During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • During austral summer1989-90 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys off Wilkes Land, and around the Balleny Islands. During this cruise 1284 km of 30-fold multichannel seismic reflection (MCS) data were collected between longitude 165 and 176 degrees East, and latitude 61 and 66 degrees South. The surveys were carried out by the research vessel OGS Explora. The 14 second, 4 ms sample rate, digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 22.5 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation.

  • During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • During austral summer1989-90 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys off Wilkes Land, and around the Balleny Islands. During this cruise 1284 km of 30-fold multichannel seismic reflection (MCS) data were collected between longitude 165 and 176 degrees East, and latitude 61 and 66 degrees South. The surveys were carried out by the research vessel OGS Explora. The 14 second, 4 ms sample rate, digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 22.5 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation.

  • During austral summer 1988/89, the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys off Wilkes Land, and around the Balleny Islands. During this cruise 3045 km of 30-fold multichannel seismic reflection (MCS) data were collected between longitude 152 and 169 degrees East, and latitude 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The 12 second, 4 ms sample rate, digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 45.16 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Resample to 8 ms, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation.

  • During austral summer 1990/91, the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys off Wilkes Land, and around the Balleny Islands. During this cruise 1935 km of 30-fold multichannel seismic reflection (MCS) data were collected between longitude 150 and 169 degrees East, and latitude 56 and 64 degrees South. The surveys were carried out by the research vessel OGS Explora. The 14 second, 4 ms sample rate, digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 74.8 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation.

  • During austral summer 1988/89, the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys off Wilkes Land, and around the Balleny Islands. During this cruise 3045 km of 30-fold multichannel seismic reflection (MCS) data were collected between longitude 152 and 169 degrees East, and latitude 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The 12 second, 4 ms sample rate, digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 45.16 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Resample to 8 ms, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation.