From 1 - 10 / 199
  • During austral summer1996/97, the National Institute of Oceanography and Applied Geophysics - OGS, on board the research vessel OGS-Explora, conducted marine geological and geophysical surveys along the Antarctic Peninsula. During this cruise there were several research programmes; TENAP, BSR and SEDANO II. The TENAP (cenozoic Tectonic Evolutionof the Northem Antarctic Peninsula) programme was a geological and geophysical research project to study the Cenozoic tectonic evolution of the Antartic Peninsula and its borders; data were collected between longitude 59 and 66 degrees West, and latitude 61 and 64 degrees South. During this programme 702.5 km of 30-fold multichannel seismic reflection (MCS) data, 16 second records, 4 ms sample rate, were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 60.5 litres, using the Single Bubble methodology, fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. The Chief Scientists on this programme was: Giulio Pellis of the Dipartimento di Ingegneria Civile e Ambientale of the Università di Trieste, Piazzale Europa n. 1, 34127 Trieste, Italy. Processing of the data generally followed a conventional sequence: Reformat, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation.

  • During Austral Summer 1989-90, the National Institute of Oceanography and Applied Geophysics - OGS, conducted marine geological and geophysical surveys off South Pacific ocean, in the Weddell Sea over Bellingshausen Sea, in the Ross Sea and over Admundsen Sea. This cruise collected approximately 8763 km of multichannel seismic reflection (MCS) data. The surveys extended, in diferent area, between longitudes 34 and 172 degrees west , and between latitudes 59 and 76 degrees south. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • During Austral Summer 1989-90, the National Institute of Oceanography and Applied Geophysics - OGS, conducted marine geological and geophysical surveys off South Pacific ocean, in the Weddell Sea over Bellingshausen Sea, in the Ross Sea and over Admundsen Sea. This cruise collected approximately 8763 km of multichannel seismic reflection (MCS) data. The surveys extended, in diferent area, between longitudes 34 and 172 degrees west , and between latitudes 59 and 76 degrees south. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • During austral summer1996/97 the National Institute of Oceanography and Applied Geophysics - OGS, on board the research vessel OGS-Explora, conducted marine geological and geophysical surveys along the Antarctic Peninsula. The SEDANO II (SEdiment Drifts of the ANtarctic Offshore) programme was the continuation of SEDANO I , acquired in 1995 (SDLS-47). This interdiciplinary programme included geology, geophysics and oceanography for the study of the sedimentary sequences of the continental rise of the Pacific Margin in the Antarctic Peninsula. During this programme 712 km of 60-fold multichannel seismic reflection (MCS) data, 8 second records, 2 ms sample rate and 286 km of single channel seismic reflection (SCS) data, 3 seconds, 1 ms sample rate, were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 60 litres, fired every 25 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m for the MCS data. The SCS data were acquired every 12,5 meters into a 18 m cable consisting of 8 hydrophone groups towed at an average depth of 3 m, except line IT97AP242H acquired every 25 m, 8 seconds and 2 ms sample rate. A GPS + TRANSIT satellite receiver system was used for navigation. The Chief Scientists on this programme was: Angelo Camerlenghi of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the MCS data generally followed a conventional sequence: Reformat, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Dynamic trace equalisation. The SCS data were processed using the following sequence: Reformat, Quality control, Deconvolution, Sum traces (from 8 to 1), Mute, Mixing, Filter, Dynamic trace equalisation.

  • During Austral Summer 1989-90, the National Institute of Oceanography and Applied Geophysics - OGS, conducted marine geological and geophysical surveys off South Pacific ocean, in the Weddell Sea over Bellingshausen Sea, in the Ross Sea and over Admundsen Sea. This cruise collected approximately 8763 km of multichannel seismic reflection (MCS) data. The surveys extended, in diferent area, between longitudes 34 and 172 degrees west , and between latitudes 59 and 76 degrees south. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • During Austral Summer 1989-90, the National Institute of Oceanography and Applied Geophysics - OGS, conducted marine geological and geophysical surveys off South Pacific ocean, in the Weddell Sea over Bellingshausen Sea, in the Ross Sea and over Admundsen Sea. This cruise collected approximately 8763 km of multichannel seismic reflection (MCS) data. The surveys extended, in diferent area, between longitudes 34 and 172 degrees west , and between latitudes 59 and 76 degrees south. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • In Austral Summer 1994-95 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular. During this cruise five (5) research programmes were conducted for a total approximately of 4469 km of multichannel seismic reflection (MCS) data. The research programmes were: SEDANO (SEdiment Drifts of the ANtarctic Offshore) with 1340 km of MCS data ; SITE SURVEY, ODP Proposal # 452 (Antarctic Glacial History and Sea-Level Change) with 507 km of MCS data; SANSCRITO (Seismic ANalysis SCotia Ridge Tectonic Outcome) with 1990 km of MCS data and ANGELINA (ANtarctic GEophysical Long range INternational Acquisition programme) with 632 km of MCS data. During the Programme SEDANO nine (9) 60-fold multichannel seismic lines were collected in the Antarctic Peninsular. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of two GI guns with a total volume of 6.7 litres fired approximately every 25 meters into a 3000 m cable consisting of 120 hydrophone groups for the 60-fold profiles. A GPS + TRANSIT satellite receiver system was used for the navigation. The Chief Scientist on this programme was: Angelo Camerlenghi of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Filter, Balance.

  • During Austral Summer 1989-90, the National Institute of Oceanography and Applied Geophysics - OGS, conducted marine geological and geophysical surveys off South Pacific ocean, in the Weddell Sea over Bellingshausen Sea, in the Ross Sea and over Admundsen Sea. This cruise collected approximately 8763 km of multichannel seismic reflection (MCS) data. The surveys extended, in diferent area, between longitudes 34 and 172 degrees west , and between latitudes 59 and 76 degrees south. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • During Austral Summer 1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Ross Sea, cruise IT91AR. During this cruise 581 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Ross Sea, off the Cape Hallett, between longitudes 171 degrees East and 178 degrees West, and latitudes 71 and 73 degrees South. In 1993-94 the OGS completed the cruise IT94AR, with 852 km of 30-fold and 673 km of 3-fold multichannel seismic reflection data collected in the Ross Sea, off the coast of the McMurdo Island, between longitudes 168 degrees East and 181 degrees West, and latitudes 73 and 77 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.5 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups for the 30-fold profiles and every 250 meters into a 1500 m streamer for the 3-fold profiles. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

  • During Austral Summer 1989-90, the National Institute of Oceanography and Applied Geophysics - OGS, conducted marine geological and geophysical surveys off South Pacific ocean, in the Weddell Sea over Bellingshausen Sea, in the Ross Sea and over Admundsen Sea. This cruise collected approximately 8763 km of multichannel seismic reflection (MCS) data. The surveys extended, in diferent area, between longitudes 34 and 172 degrees west , and between latitudes 59 and 76 degrees south. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.