During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

The MBES NZ-water dataset was collected during the XXXIX PNRA Italian Antarctic Expedition aboard R/V Laura Bassi in direct response to a request from New Zealand to acquire bathymetric data during transits within their waters. The acquisition of this valuable dataset was carried out by the ISOBatA Project team, utilizing a state-of-the-art multibeam EM304 system installed on the R/V Laura Bassi. The genesis of the MBES NZ-water dataset is deeply linked to the international collaborative effort aimed at mapping unexplored regions, exemplified by the Seabed 2030 Project. By aligning with New Zealand's research objectives, both the ISOBatA project and the Italian Antarctic Expedition epitomize their commitment to knowledge exchange and the advancement of scientific understanding on a global scale.

During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1991-92 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular and the Bransfield Strait. During this cruise approximately 3407 km of 30-fold multichannel seismic reflection (MCS) data were collected in the Antarctic Peninsular and the Bransfield Strait between longitudes 50 and 78 degrees West, and latitudes 60 and 68 degrees South. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 71.96 litres fired approximately every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.