During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.

During Austral Summer1990-91 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys in the Ross Sea, over Weddel Sea and in the Balleny Zone of the MacQuarie Triple Junction. This cruise collected approximately 6036 km of multichannel seismic reflection (MCS) data. The surveys extended, in different areas, between longitudes 37 and 56 degrees west, and between latitudes 59 and 62 degrees south (Weddel Sea), between longitudes 171 east and 178 degrees west, and between latitudes 71 and 73 degrees south (Ross Sea), between longitudes 150 and 158 degrees east , and between latitudes 51 and 62 degrees south (Balleny). The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with variable configuration from a total volume of 45.16 litres fired approximately every 50 meters. A GPS + TRANSIT satellite receiver system was used for navigation. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, Balance.